Cost Of Mold Removal

What Is The Cost Of Mold Removal By Location?

Mold may potentially take root and grow everywhere, necessitating quick treatment at a cost ranging from $100 to $30,000. The location has a direct impact on the cost of mold removal. The table below depicts some of the most typical mold growth areas and their associated remediation expenses, followed by an explanation in the subsections following.

Location Cost of Mold Removal (Labor Included)
Vent $100 – $500
Underside of the Roof Deck $500 – $1,000
Bathroom $500 – $1,500
Crawl Space $500 – $2,000
Attic $500 – $7,000
Drywall $1,000 – $7,000
Basement $1,500 – $4,000
Concrete Block Walls $1,500 – $4,000
Air Duct $2,000 – $6,000
Whole Home $10,000 – $30,000

 

Cost Of Mold Removal In Vents

If the ducts are not damaged, the cost of eradicating mold from the vents ranges between $100 and $500. If your vents are damaged, your ducts may also be impacted and should be examined for mold since they are frequently affected simultaneously. If this is the case, you will need to have mold removed from your air ducts and vents. These extra processes will significantly raise the price.

The Underside Of The Roof Deck

One of the most often damaged areas by mold is the underside of the roof deck. This section of the attic is treated independently from the remainder of the attic. Roof leaks are the primary source of mold growth. Scrubbers are typically used to clean the underside of the deck to prevent the spread of spores. Cost of mold removal ranges between $500 and $1,000, depending on the amount of the mold.

Cost Of Mold Removal In Bathroom

Mold removal in your bathroom generally costs between $500 and $1,500. Mold may develop in the shower, bathtub, sink, drains, or even the walls above the shower if your bathroom is not adequately aired or if there has been a leak. The easiest way to get rid of mold is to utilize air scrubbers. If you discover or suspect mold development under your tub, sink, or vanity, the cost of the fix may skyrocket.

Cost Of Mold Removal In Crawl Space

Mold growth in a crawl space may cost anywhere from $500 to $2,000 to eradicate, depending on the size of the crawlspace and the amount of mold present. Crawl spaces, like basements, grow mold for many of the same reasons: moisture and high humidity levels. They generally have better ventilation and a smaller growth area than basements since they are considerably smaller and more confined areas. It is less expensive than removing mold from a basement.

Cost Of Mold Removal In Attic

Mold remediation in the attic can cost anywhere from $500 and $7,000, depending on the size of the area and the ease of access. Mold thrives in attics owing to inadequate ventilation, moisture issues such as a leaking AC unit or leaky room, and condensation caused by improper insulation. If the most afflicted region is within the insulation, it may be necessary to remove it. The labor for removing the insulation will increase the cost. The most crucial stages in mold treatment in the attic are proper cleaning and ventilation.

Cost Of Mold Removal In Drywall

Mold removal from drywall is one of the most expensive forms of cleanup, with prices ranging from $1,000 to $7,000. Where you fall in that range is determined by whether it is a basic treatment or a complete wall replacement. In certain cases, the pipes that are producing the mold problems may need to be repaired. Mold grows within drywall due to sweating or leaky pipes that enable condensation or moisture to build up.

Cost Of Mold Removal In Basement

Cost of mold removal in the basement ranges between $1,500 and $4,000. Basements are prone to moisture, excessive humidity, and leaking pipes, all of which provide ideal circumstances for mold to take hold and thrive. Mold may develop in basement timber, insulation, and drywall as well. The typical basement size is about 1000 square feet, with most mold areas ranging between 100 and 300 square feet. Basement removal includes cleaning the afflicted areas, drying out the space with dehumidifiers, and removing spores using air scrubbers.

Mold Removal On Concrete Block Walls

Mold on concrete block walls is frequently produced by leaky or sweating pipes, which enable moisture and condensation to accumulate. This form of cleanup entails removing any impacted drywall or insulation, cleaning the affected areas, and repairing any leaky or sweating pipes before repairing the walls. This sort of cleanup may be costly, costing up to $4,000 for big regions.

Cost Of Mold Removal In Air Duct

The typical cost of air duct mold remediation is between $2,000 and $6,000. Mold can be discovered in some HVAC systems’ air ducts. If left untreated, it can contaminate the air and create health problems. To eliminate all airborne spores successfully, air duct mold removal necessitates specialized cleaning. This is one of the most costly mold cleanup methods. Due to moisture build-up and condensation that occurs when filters aren’t replaced correctly or the HVAC system isn’t properly vented and maintained, ducts may become a breeding ground for mold. When mold is detected, the HVAC system must be promptly switched off so that the airborne spores do not spread throughout the property.

Overall Cost Of Mold Removal In Your Entire House

If you have mold and harmful spores throughout your home, expect to pay between $10,000 and $30,000 for treatment. This price includes both the cleanup procedure and the expense of repairing water damage. If you want to avoid mold in the future, consider replacing windows, upgrading your basement drainage system, and having the soil surrounding your property regraded. This job necessitates the replacement of walls, carpeting, and other home fixtures, which adds to the overall cost.

Professional Mold Removal Cost

Mold remediation services generally cost between $500 and $7,000, with the majority of customers spending between $1,500 and $3,500. Approximately 60% of the project’s cost is for labor, with the remaining 40% for supplies. This entails sealing and thoroughly cleaning the entire space. Depending on the quantity of mold, what produced it, and the extent of damage, the procedure can take anything from a few hours to many weeks.

Mold remediation is a multi-step procedure that starts once the affected area has been properly dried. Before cleanup can begin, large fans and dehumidifiers are used to dry the space. If the cause of the moisture or leak has not been repaired, this should be done before proceeding with the cleanup. After the area has dried, inspection and testing will commence. Mold testing is not performed by all mold cleanup businesses. Testing is only performed on request if there are health concerns. When receiving quotes, make sure you inquire about this.

Mold spores spread rapidly if disturbed, thus the area being treated is sealed. To eliminate and prevent the transmission of airborne spores, air filtration devices are utilized to block off the space. Physical barriers, such as plastic sheeting and negative air pressure, keep air from flowing between the contaminated region and the surrounding locations. Following that, the air is cleaned using a mix of “air scrubbers” and HEPA vacuums to eliminate any mold particles or spores.

To eliminate mold from hard surfaces, antifungal and antibacterial cleaners are utilized. If possible, furniture, clothing, or toys are removed from the spot for cleaning to ensure that all mold spores are removed. This procedure entails a thorough cleaning with an antifungal or antibacterial cleaner. Fogging equipment eliminates scents from the area as well as the musty aromas left by mold.

The average cost of mold removal is $800 to $1,100, using a two-step treatment method. A sterilizing solution is fogged into the mold-infested area during dry fog mold remediation. The oxygen then forms droplets that fall onto the surfaces of the mold and weigh it down. This method is most effective in removing mold spores from the air, but the surface may still require further cleaning.

You may choose dry ice removal, which is somewhat more expensive but quite effective in killing mold. This method includes blasting dry ice pellets at the mold-containing surface with high-pressure air. This blasts the mold straight off the surface, making it both fast and efficient. The typical cost of dry ice mold eradication is around $1,400 to $1,600.

Finally, any surfaces that are not cleanable should be removed. This includes drywall, carpets, wallpaper, and other surfaces that have been damaged. Following the removal of the old surfaces, new surfaces are placed. Depending on the degree of damage and mold development, this might be as easy as putting up a single sheet of drywall or as complex as tearing down and renovating an entire room. The most essential thing is to remove any damaged surfaces and materials for everyone’s safety.

A Mold Removal Company Serving Illinois

Call Excel Fire And Water Damage Restoration Services now at (847) 961-2165 for 24 hour basement water damage restoration, fire damage restoration, or mold treatment, or receive a quick quotation from our website. Our mold removal experts will get to your Illinois home or business and tell you the total cost of mold removal in 30 to 60 minutes.

 

Learn more about The Cost of Common Household Mold Removal

Get A Free Estimate

Please Fill Out The Form To Receive A Free Estimate
Or Call (224) 412-5222

More To Explore

Black Mold

What Are The Consequences Of Being Exposed To Black Mold?

Despite popular perception, there is no strong evidence that black mold exposure causes cancer or lung illness. Mold is an example of a fungus. It may be found virtually anywhere, even the air. In general, typical levels of mold in the environment offer no significant health risk to healthy persons with normal immune system function.

Read More »
Household Mold

The Cost of Common Household Mold Removal

While it is possible to eliminate mold from your house by conducting some internet research and following instructions, it is always preferable to contact a reputable professional company to perform the mold remediation. Professional mold remediation companies are qualified to locate household mold, identify its origins, assess the amount and quantity of development, control it,

Read More »
Mold Removal

Mold Removal: What is the Process?

It is always preferable to contact a professional mold removal and cleanup company when it comes to mold removal. However, if the mold in your house is not hazardous and the area of mold growth is tiny (less than 10 square feet, or approximately a 3 by 3 foot patch), you may do the mold

Read More »
Scroll to Top

Fill Out The Form Below To Contact

Excel Fire And Water Damage Restoration Services

or Call (224) 412-5222